Switch CHOP

From Derivative
Jump to: navigation, search


Summary

The Switch CHOP allows you to control the flow of channels through a CHOPnet. It selects one of the input CHOPs by index and copies it exactly. This is useful for selecting one of several "gestures" or actions. Only one input chop can be selected at a time.

Inputs are indexed starting at 0, so that the first input is 0, the second is 1, and so on.

If the First Input Is Index parameter is enabled, the first input is used as the "switch" and the remaining inputs will be selection choices. In this case, the second input will be indexed as 0, the third as 1, the fourth as 2, and so on (the Switch input chop is not indexed). The index value is determined by evaluating the first channel in the first input at the current frame. Only integer indices are used; fractional indices will be rounded down to the closest integer.

If the index is less than 0, then the index will be interpreted to be 0. If the index is greater than the number of input chops, the last input chop is selected.

If you wish to blend between inputs use the Cross CHOP or the Blend CHOP.

PythonIcon.pngswitchCHOP_Class


Parameters - Switch Page

First Input is Index indexfirst - If enabled, it will use the first input CHOP's first channel to determine which input to select.

Index index - The input index to use if First Input Is Index is off.



Parameters - Common Page

Time Slice timeslice - Turning this on forces the channels to be "Time Sliced". A Time Slice is the time between the last cook frame and the current cook frame.

Scope scope - To determine which channels get affected, some CHOPs use a Scope string on the Common page.

Sample Rate Match srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or "Linear" if the Interpolate Options are not available.

  • Resample At First Input's Rate first - Use rate of first input to resample others.
  • Resample At Maximum Rate max - Resample to the highest sample rate.
  • Resample At Minimum Rate min - Resample to the lowest sample rate.
  • Error If Rates Differ err - Doesn't accept conflicting sample rates.

Export Method exportmethod - - This will determine how to connect the CHOP channel to the parameter. Refer to the Export article for more information.

  • DAT Table by Index datindex - Uses the docked DAT table and references the channel via the index of the channel in the CHOP.
  • DAT Table by Name datname - Uses the docked DAT table and references the channel via the name of the channel in the CHOP.
  • Channel Name is Path:Parameter autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.

Export Root autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is Path:Parameter are relative to.

Export Table exporttable - The DAT used to hold the export information when using the DAT Table Export Methods (See above).



CHOPs
Ableton Link • Analyze • Angle • Attribute • Audio Band EQ • Audio Device In • Audio Device Out • Audio Dynamics • Audio File In • Audio Filter • Audio Movie • Audio Oscillator • Audio Para EQ • Audio Play • Audio Render • Audio Spectrum • Audio Stream In • Audio Stream Out • Beat • BlackTrax • Blend • Clip Blender • Clip • Clock • Composite • Constant • Copy • Count • CPlusPlus • Cross • Cycle • DAT to • Delay • Delete • DMX In • DMX Out • Envelope • EtherDream • Event • Expression • Extend • Fan • Feedback • File In • File Out • Filter • Function • Gesture • Handle • Helios DAC • Hog • Hokuyo • Hold • In • Info • Interpolate • Introduction To CHOPs id• Inverse Curve • Inverse Kin • Join • Joystick • Keyboard In • Keyframe • Kinect • Lag • Leap Motion • Leuze ROD4 • LFO • Limit • Logic • Lookup • LTC In • LTC Out • Math • Merge • MIDI In • MIDI In Map • MIDI Out • Mouse In • Mouse Out • NatNet In • Noise • Null • Object • Oculus Audio • Oculus Rift • OpenVR • OSC In • OSC Out • Out • Override • Panel • Parameter • Pattern • Perform • Pipe In • Pipe Out • PosiStageNet • Pulse • RealSense • Record • Rename • Render Pick • Reorder • Replace • Resample • S Curve • Scan • Script • Select • Sequencer • Serial • Shared Mem In • Shared Mem Out • Shift • Shuffle • Slope • SOP to • Sort • Speed • Splice • Spring • Stretch • Switch • Sync In • Sync Out • Tablet • Time Slice • Timeline • Timer • TOP to • Touch In • Touch Out • Trail • Transform • Trigger • Trim • Warp • Wave • ZED

An Operator Family which operate on Channels (a series of numbers) which are used for animation, audio, mathematics, simulation, logic, UI construction, and many other applications.

A Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that only contain the CHOP channels' samples between the last and the current cook frame.

A parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator.

samples-per-second of a CHOP. Each CHOP in your network has a sample rate, whether it is used or not. The overall timeline has a "frame rate", which is the number of animation frames per second, generally your monitor display frequency.

Exporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.

An Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a command Script, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.

The location of an operator within the TouchDesigner environment, for example, /geo1/torus1, a node called torus1 in a component called geo1. The path / is called Root. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.

Parameters in TouchDesigner are an operator's settings (numbers, menus, flags, strings, paths) which the user can alter. Parameters for any operator can be opened by right-clicking on the operator and selecting "Parameters..." A currently selected operator's parameters can be viewed in a Network Editor by pressing the keyboard shortcut 'p'.

TouchDesigner is a hierarchy of components. "root" is the top-most network in the hierarchy. The Path is simply /. A typical path is /project1/moviein1.