# Emboss TOP

## Summary

The Emboss TOP creates the effect that an image is embossed in a thin sheet of metal. Edges in the image will appear raised.

## Parameters - Emboss Page

Select `select` - - This menu selects how the edges in the image are found. The edges will appear raised or depressed in the output image depending on their slope.

• Luminance `luminance` - Pulls edges from the luminance values of the image.
• Red `red` - Pulls edges from the red channel of the image.
• Green `green` - Pulls edges from the green channel of the image.
• Blue `blue` - Pulls edges from the blue channel of the image.
• Alpha `alpha` - Pulls edges from the alpha channel of the image.
• RGB Average `rgbaverage` - Pulls edges from the combined RGB average of the image.
• RGBA Average `average` - Pulls edges from the combined RGBA average of the image.

Method `method` - - Determines what pixels to use when calculating the slope at each pixel in the image.

• Use Previous And Current `prevcur` - Uses the previous and current pixels for slope calculation.
• Use Current And Next `curnext` - Uses the current and next pixels for slope calculation.
• Use Previous And Next `prevnext` - Uses the previous and next pixels for slope calculation.

Midpoint `midpoint` - Sets the greyscale color of the midpoint of the emboss. This is the color of any part in the image that is not raised or depressed.

Strength `strength` - The depth of the emboss. Higher values make the output look more deeply etched.

Sample Step `offset` - - When sampling the image, this determines the distance from each pixel to the sample pixel. When units are set to pixels, it is the number of pixels away from the current pixel which is sampled to find edges. A Sample Step of 3 would sample pixels 3 pixels away to look for edges.

• `offset1` -
• `offset2` -

Sample Step Unit `offsetunit` -

Direction `direction` - Controls the position of the light source, changing the direction of the highlights and shadows in the embossed output image.

## Parameters - Common Page

Output Resolution `outputresolution` - - quickly change the resolution of the TOP's data.

• Use Input `useinput` - Uses the input's resolution.
• Eighth `eighth` - Multiply the input's resolution by that amount.
• Quarter `quarter` - Multiply the input's resolution by that amount.
• Half `half` - Multiply the input's resolution by that amount.
• 2X `2x` - Multiply the input's resolution by that amount.
• 4X `4x` - Multiply the input's resolution by that amount.
• 8X `8x` - Multiply the input's resolution by that amount.
• Fit Resolution `fit` - Multiply the input's resolution by that amount.
• Limit Resolution `limit` - Multiply the input's resolution by that amount.
• Custom Resolution `custom` - Enables the Resolution parameter below, giving direct control over width and height.

Resolution `resolution` - - Enabled only when the Resolution parameter is set to Custom Resolution. Some Generators like Constant and Ramp do not use inputs and only use this field to determine their size. The drop down menu on the right provides some commonly used resolutions.

• W `resolutionw` -
• H `resolutionh` -

Resolution Menu `resmenu` -

Use Global Res Multiplier `resmult` - Uses the Global Resolution Multiplier found in Edit>Preferences>TOPs. This multiplies all the TOPs resolutions by the set amount. This is handy when working on computers with different hardware specifications. If a project is designed on a desktop workstation with lots of graphics memory, a user on a laptop with only 64MB VRAM can set the Global Resolution Multiplier to a value of half or quarter so it runs at an acceptable speed. By checking this checkbox on, this TOP is affected by the global multiplier.

Output Aspect `outputaspect` - - Sets the image aspect ratio allowing any textures to be viewed in any size. Watch for unexpected results when compositing TOPs with different aspect ratios. (You can define images with non-square pixels using xres, yres, aspectx, aspecty where xres/yres != aspectx/aspecty.)

• Use Input `useinput` - Uses the input's aspect ratio.
• Resolution `resolution` - Uses the aspect of the image's defined resolution (ie 512x256 would be 2:1), whereby each pixel is square.
• Custom Aspect `custom` - Lets you explicitly define a custom aspect ratio in the Aspect parameter below.

Aspect `aspect` - - Use when Output Aspect parameter is set to Custom Aspect.

• Aspect1 `aspect1` -
• Aspect2 `aspect2` -

Aspect Menu `armenu` -

Input Smoothness `inputfiltertype` - - This controls pixel filtering on the input image of the TOP.

• Nearest Pixel `nearest` - Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
• Interpolate Pixels `linear` - Uses linear filtering between pixels. This is how you get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
• Mipmap Pixels `mipmap` - Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail.

Fill Viewer `fillmode` - - Determine how the TOP image is displayed in the viewer. NOTE:To get an understanding of how TOPs work with images, you will want to set this to Native Resolution as you lay down TOPs when starting out. This will let you see what is actually happening without any automatic viewer resizing.

• Use Input `useinput` - Uses the same Fill Viewer settings as it's input.
• Fill `fill` - Stretches the image to fit the edges of the viewer.
• Fit Horizontal `width` - Stretches image to fit viewer horizontally.
• Fit Vertical `height` - Stretches image to fit viewer vertically.
• Fit Best `best` - Stretches or squashes image so no part of image is cropped.
• Fit Outside `outside` - Stretches or squashes image so image fills viewer while constraining it's proportions. This often leads to part of image getting cropped by viewer.
• Native Resolution `nativeres` - Displays the native resolution of the image in the viewer.

Viewer Smoothness `filtertype` - - This controls pixel filtering in the viewers.

• Nearest Pixel `nearest` - Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
• Interpolate Pixels `linear` - Uses linear filtering between pixels. Use this to get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
• Mipmap Pixels `mipmap` - Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail.

Passes `npasses` - Duplicates the operation of the TOP the specified number of times. Making this larger than 1 is essentially the same as taking the output from each pass, and passing it into the first input of the node and repeating the process. Other inputs and parameters remain the same for each pass.

Channel Mask `chanmask` - Allows you to choose which channels (R, G, B, or A) the TOP will operate on. All channels are selected by default.

Pixel Format `format` - - Format used to store data for each channel in the image (ie. R, G, B, and A). Refer to Pixel Formats for more information.

• Use Input `useinput` - Uses the input's pixel format.
• 8-bit fixed (RGBA) `rgba8fixed` - Uses 8-bit integer values for each channel.
• sRGB 8-bit fixed (RGBA) `srgba8fixed` - Uses 8-bit integer values for each channel and stores color in sRGB colorspace.
• 16-bit float (RGBA) `rgba16float` - Uses 16-bits per color channel, 64-bits per pixel.
• 32-bit float (RGBA) `rgba32float` - Uses 32-bits per color channel, 128-bits per pixels.
• 10-bit RGB, 2-bit Alpha, fixed (RGBA) `rgb10a2fixed` - Uses 10-bits per color channel and 2-bits for alpha, 32-bits total per pixel.
• 16-bit fixed (RGBA) `rgba16fixed` - Uses 16-bits per color channel, 64-bits total per pixel.
• 11-bit float (RGB), Positive Values Only `rgba11float` - A RGB floating point format that has 11 bits for the Red and Green channels, and 10-bits for the Blue Channel, 32-bits total per pixel (therefore the same memory usage as 8-bit RGBA). The Alpha channel in this format will always be 1. Values can go above one, but can't be negative. ie. the range is [0, infinite).
• 16-bit float (RGB) `rgb16float` -
• 32-bit float (RGB) `rgb32float` -
• 8-bit fixed (Mono) `mono8fixed` - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 8-bits per pixel.
• 16-bit fixed (Mono) `mono16fixed` - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
• 16-bit float (Mono) `mono16float` - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
• 32-bit float (Mono) `mono32float` - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 32-bits per pixel.
• 8-bit fixed (RG) `rg8fixed` - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 8-bits per channel, 16-bits total per pixel.
• 16-bit fixed (RG) `rg16fixed` - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
• 16-bit float (RG) `rg16float` - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
• 32-bit float (RG) `rg32float` - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 32-bits per channel, 64-bits total per pixel.
• 8-bit fixed (A) `a8fixed` - An Alpha only format that has 8-bits per channel, 8-bits per pixel.
• 16-bit fixed (A) `a16fixed` - An Alpha only format that has 16-bits per channel, 16-bits per pixel.
• 16-bit float (A) `a16float` - An Alpha only format that has 16-bits per channel, 16-bits per pixel.
• 32-bit float (A) `a32float` - An Alpha only format that has 32-bits per channel, 32-bits per pixel.
• 8-bit fixed (Mono+Alpha) `monoalpha8fixed` - A 2 channel format, one value for RGB and one value for Alpha. 8-bits per channel, 16-bits per pixel.
• 16-bit fixed (Mono+Alpha) `monoalpha16fixed` - A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
• 16-bit float (Mono+Alpha) `monoalpha16float` - A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
• 32-bit float (Mono+Alpha) `monoalpha32float` - A 2 channel format, one value for RGB and one value for Alpha. 32-bits per channel, 64-bits per pixel.

## Operator Inputs

• Input 0 -

Add • Analyze • Anti Alias • Blob Track • Blur • Cache Select • Cache • Channel Mix • CHOP to • Chroma Key • Circle • Composite • Constant • Convolve • Corner Pin • CPlusPlus • Crop • Cross • Cube Map • Depth • Difference • DirectX In • DirectX Out • Displace • Edge • Emboss • Feedback • Fit • Flip • GLSL Multi • GLSL • HSV Adjust • HSV to RGB • Experimental:Import Select • In • Inside • Introduction To TOPs id• Kinect • Layout • Leap Motion • Level • Lookup • Luma Blur • Luma Level • Math • Matte • Mirror • Monochrome • Movie File In • Movie File Out • Experimental:Movie File Out • Multiply • NDI In • NDI Out • Noise • Normal Map • Null • Oculus Rift • OP Viewer • OpenColorIO • OpenVR • Out • Outside • Over • Pack • Photoshop In • PreFilter Map • Projection • Ramp • RealSense • Rectangle • Remap • Render Pass • Render Select • Render • Reorder • Resolution • RGB Key • RGB to HSV • Scalable Display • Screen Grab • Screen • Select • Shared Mem In • Shared Mem Out • Slope • SSAO • Substance Select • Substance • Subtract • SVG • Switch • Syphon Spout In • Syphon Spout Out • Text • Texture 3D • Texture Sampling arameters• Threshold • Tile • Time Machine • TOP• TOP iewer• Touch In • Touch Out • Transform • Under • Video Device In • Video Device Out • Video Stream In • Video Stream Out • Vioso • Web Render • ZED

An Operator Family that creates, composites and modifies images, and reads/writes images and movies to/from files and the network. TOPs run on the graphics card's GPU.

The width and height of an image in pixels. Most TOPs, like the Movie File In TOP can set the image resolution. See Aspect Ratio for the width/height ratio of an image, taking into account non-square pixels.

The viewer of a node can be (1) the interior of a node (the Node Viewer), (2) a floating window (RMB->View... on node), or (3) a Pane that graphically shows the results of an operator.

A CHOP outputs one or more channels, where a channel is simply a sequence of numbers, representing motion, audio, etc. Channels are passed between CHOPs in TouchDesigner networks. See also Export.