OAK Select TOP

From Derivative
Jump to navigation Jump to search

Summary
[edit]

The OAK Select can receive images of many different formats from the OAK Camera. These formats include RGB, monochrome, depth images, and XYZ Point Clouds.

See Also: OAK-D OAK Device CHOP OAK Select CHOP

PythonIcon.pngoakselectTOP_Class


Parameters - OAK Page

Active active -

OAK Device CHOP chop -

Stream stream -

Cache Size cachesize - The Cache Size parameter works like the Queue Size parameter on the OAK Select CHOP. Picking 2 is a good default choice because it enables TouchDesigner to show an image to the user while asynchronously writing new data into the remaining buffer.

Output Index outputindex - This parameter mimics the Output Index parameter of a Cache TOP. When using a more complex depthai pipeline such as the hand tracking example, the hand tracking data will arrive at TouchDesigner with greater latency than the RGB images. By using a negative output index, the images can be delayed so that they better align with the tracking data.

Output Index Unit outputindexunit - -
  • I indices -
  • F frames -
  • S seconds -
Limit Max limitmax - When the stream is a depth image (and the stream name actually contains the word "depth"), it can be helpful to limit the maximum "z-depth" of the image. This value is measured in meters.

Output Format outputformat - - TouchDesigner can apply basic image-processing that depthai does not yet do. For example, if the Output Format is "Point Cloud", the stream is a depth stream, and the stream name contains "depth", then the image in the OAK Select will be a 32-bit XYZ point cloud derived from the depth image and the camera's intrinsic matrix.
  • Default default -
  • Point Cloud pointcloud -


Parameters - Common Page

Output Resolution outputresolution - - quickly change the resolution of the TOP's data.
  • Use Input useinput - Uses the input's resolution.
  • Eighth eighth - Multiply the input's resolution by that amount.
  • Quarter quarter - Multiply the input's resolution by that amount.
  • Half half - Multiply the input's resolution by that amount.
  • 2X 2x - Multiply the input's resolution by that amount.
  • 4X 4x - Multiply the input's resolution by that amount.
  • 8X 8x - Multiply the input's resolution by that amount.
  • Fit Resolution fit - Grow or shrink the input resolution to fit this resolution, while keeping the aspect ratio the same.
  • Limit Resolution limit - Limit the input resolution to be not larger than this resolution, while keeping the aspect ratio the same.
  • Custom Resolution custom - Directly control the width and height.
Resolution resolution - - Enabled only when the Resolution parameter is set to Custom Resolution. Some Generators like Constant and Ramp do not use inputs and only use this field to determine their size. The drop down menu on the right provides some commonly used resolutions.
  • W resolutionw -
  • H resolutionh -
Resolution Menu resmenu - A drop-down menu with some commonly used resolutions.

Use Global Res Multiplier resmult - Uses the Global Resolution Multiplier found in Edit>Preferences>TOPs. This multiplies all the TOPs resolutions by the set amount. This is handy when working on computers with different hardware specifications. If a project is designed on a desktop workstation with lots of graphics memory, a user on a laptop with only 64MB VRAM can set the Global Resolution Multiplier to a value of half or quarter so it runs at an acceptable speed. By checking this checkbox on, this TOP is affected by the global multiplier.

Output Aspect outputaspect - - Sets the image aspect ratio allowing any textures to be viewed in any size. Watch for unexpected results when compositing TOPs with different aspect ratios. (You can define images with non-square pixels using xres, yres, aspectx, aspecty where xres/yres != aspectx/aspecty.)
  • Use Input useinput - Uses the input's aspect ratio.
  • Resolution resolution - Uses the aspect of the image's defined resolution (ie 512x256 would be 2:1), whereby each pixel is square.
  • Custom Aspect custom - Lets you explicitly define a custom aspect ratio in the Aspect parameter below.
Aspect aspect - - Use when Output Aspect parameter is set to Custom Aspect.
  • Aspect1 aspect1 -
  • Aspect2 aspect2 -
Aspect Menu armenu - A drop-down menu with some commonly used aspect ratios.

Input Smoothness inputfiltertype - - This controls pixel filtering on the input image of the TOP.
  • Nearest Pixel nearest - Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
  • Interpolate Pixels linear - Uses linear filtering between pixels. This is how you get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
  • Mipmap Pixels mipmap - Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail.
Fill Viewer fillmode - - Determine how the TOP image is displayed in the viewer.

NOTE:To get an understanding of how TOPs work with images, you will want to set this to Native Resolution as you lay down TOPs when starting out. This will let you see what is actually happening without any automatic viewer resizing.

  • Use Input useinput - Uses the same Fill Viewer settings as it's input.
  • Fill fill - Stretches the image to fit the edges of the viewer.
  • Fit Horizontal width - Stretches image to fit viewer horizontally.
  • Fit Vertical height - Stretches image to fit viewer vertically.
  • Fit Best best - Stretches or squashes image so no part of image is cropped.
  • Fit Outside outside - Stretches or squashes image so image fills viewer while constraining it's proportions. This often leads to part of image getting cropped by viewer.
  • Native Resolution nativeres - Displays the native resolution of the image in the viewer.
Viewer Smoothness filtertype - - This controls pixel filtering in the viewers.
  • Nearest Pixel nearest - Uses nearest pixel or accurate image representation. Images will look jaggy when viewing at any zoom level other than Native Resolution.
  • Interpolate Pixels linear - Uses linear filtering between pixels. Use this to get TOP images in viewers to look good at various zoom levels, especially useful when using any Fill Viewer setting other than Native Resolution.
  • Mipmap Pixels mipmap - Uses mipmap filtering when scaling images. This can be used to reduce artifacts and sparkling in moving/scaling images that have lots of detail. When the input is 32-bit float format, only nearest filtering will be used (regardless of what is selected).
Passes npasses - Duplicates the operation of the TOP the specified number of times. For every pass after the first it takes the result of the previous pass and replaces the node's first input with the result of the previous pass. One exception to this is the GLSL TOP when using compute shaders, where the input will continue to be the connected TOP's image.

Channel Mask chanmask - Allows you to choose which channels (R, G, B, or A) the TOP will operate on. All channels are selected by default.

Pixel Format format - - Format used to store data for each channel in the image (ie. R, G, B, and A). Refer to Pixel Formats for more information.
  • Use Input useinput - Uses the input's pixel format.
  • 8-bit fixed (RGBA) rgba8fixed - Uses 8-bit integer values for each channel.
  • sRGB 8-bit fixed (RGBA) srgba8fixed - Uses 8-bit integer values for each channel and stores color in sRGB colorspace. Note that this does not apply an sRGB curve to the pixel values, it only stores them using an sRGB curve. This means more data is used for the darker values and less for the brighter values. When the values are read downstream they will be converted back to linear. For more information refer to sRGB.
  • 16-bit float (RGBA) rgba16float - Uses 16-bits per color channel, 64-bits per pixel.
  • 32-bit float (RGBA) rgba32float - Uses 32-bits per color channel, 128-bits per pixels.
  • 10-bit RGB, 2-bit Alpha, fixed (RGBA) rgb10a2fixed - Uses 10-bits per color channel and 2-bits for alpha, 32-bits total per pixel.
  • 16-bit fixed (RGBA) rgba16fixed - Uses 16-bits per color channel, 64-bits total per pixel.
  • 11-bit float (RGB), Positive Values Only rgba11float - A RGB floating point format that has 11 bits for the Red and Green channels, and 10-bits for the Blue Channel, 32-bits total per pixel (therefore the same memory usage as 8-bit RGBA). The Alpha channel in this format will always be 1. Values can go above one, but can't be negative. ie. the range is [0, infinite).
  • 16-bit float (RGB) rgb16float -
  • 32-bit float (RGB) rgb32float -
  • 8-bit fixed (Mono) mono8fixed - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 8-bits per pixel.
  • 16-bit fixed (Mono) mono16fixed - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
  • 16-bit float (Mono) mono16float - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 16-bits per pixel.
  • 32-bit float (Mono) mono32float - Single channel, where RGB will all have the same value, and Alpha will be 1.0. 32-bits per pixel.
  • 8-bit fixed (RG) rg8fixed - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 8-bits per channel, 16-bits total per pixel.
  • 16-bit fixed (RG) rg16fixed - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
  • 16-bit float (RG) rg16float - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 16-bits per channel, 32-bits total per pixel.
  • 32-bit float (RG) rg32float - A 2 channel format, R and G have values, while B is 0 always and Alpha is 1.0. 32-bits per channel, 64-bits total per pixel.
  • 8-bit fixed (A) a8fixed - An Alpha only format that has 8-bits per channel, 8-bits per pixel.
  • 16-bit fixed (A) a16fixed - An Alpha only format that has 16-bits per channel, 16-bits per pixel.
  • 16-bit float (A) a16float - An Alpha only format that has 16-bits per channel, 16-bits per pixel.
  • 32-bit float (A) a32float - An Alpha only format that has 32-bits per channel, 32-bits per pixel.
  • 8-bit fixed (Mono+Alpha) monoalpha8fixed - A 2 channel format, one value for RGB and one value for Alpha. 8-bits per channel, 16-bits per pixel.
  • 16-bit fixed (Mono+Alpha) monoalpha16fixed - A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
  • 16-bit float (Mono+Alpha) monoalpha16float - A 2 channel format, one value for RGB and one value for Alpha. 16-bits per channel, 32-bits per pixel.
  • 32-bit float (Mono+Alpha) monoalpha32float - A 2 channel format, one value for RGB and one value for Alpha. 32-bits per channel, 64-bits per pixel.


Info CHOP Channels

Extra Information for the oakselect TOP can be accessed via an Info CHOP.

Specific oakselect TOP Info Channels

  • messages_received - The total number of messages received with stream name set on the OAK Select TOP.
  • fps - the effective frames-per-second of this stream, i.e., how quickly TouchDesigner is receiving messages. This is not the target FPS of the stream.

Common TOP Info Channels

  • resx - Horizontal resolution of the TOP in pixels.
  • resy - Vertical resolution of the TOP in pixels.
  • aspectx - Horizontal aspect of the TOP.
  • aspecty - Vertical aspect of the TOP.
  • depth - Depth of 2D or 3D array if this TOP contains a 2D or 3D texture array.
  • gpu_memory_used - Total amount of texture memory used by this TOP.

Common Operator Info Channels

  • total_cooks - Number of times the operator has cooked since the process started.
  • cook_time - Duration of the last cook in milliseconds.
  • cook_frame - Frame number when this operator was last cooked relative to the component timeline.
  • cook_abs_frame - Frame number when this operator was last cooked relative to the absolute time.
  • cook_start_time - Time in milliseconds at which the operator started cooking in the frame it was cooked.
  • cook_end_time - Time in milliseconds at which the operator finished cooking in the frame it was cooked.
  • cooked_this_frame - 1 if operator was cooked this frame.
  • warnings - Number of warnings in this operator if any.
  • errors - Number of errors in this operator if any.


TouchDesigner Build:

TOPs
Add • Analyze • Anti Alias • Blob Track • Bloom • Blur • Cache Select • Cache • Channel Mix • CHOP to • Chroma Key • Circle • Composite • Constant • Convolve • Corner Pin • CPlusPlus • Crop • Cross • Cube Map • Depth • Difference • Direct Display Out • DirectX In • DirectX Out • Displace • Edge • Emboss • Feedback • Fit • Flip • Function • GLSL Multi • GLSL • HSV Adjust • HSV to RGB • Import Select • In • Inside • Introduction To s Vid • Kinect Azure Select • Kinect Azure • Kinect • Layout • Leap Motion • Lens Distort • Level • Limit • Lookup • Luma Blur • Luma Level • Math • Matte • Mirror • Monochrome • MoSys • Movie File In • Movie File Out • MPCDI • Multiply • Ncam • NDI In • NDI Out • Noise • Normal Map • Notch • Null • Nvidia Background • Nvidia Denoise • Nvidia Flex • Nvidia Flow • Nvidia Upscaler • OAK Select • Oculus Rift • OP Viewer • OpenColorIO • OpenVR • Optical Flow • Orbbec Select • Orbbec • Ouster Select • Ouster • Out • Outside • Over • Pack • Photoshop In • Point File In • Point File Select • Point Transform • PreFilter Map • Projection • Ramp • RealSense • Rectangle • Remap • Render Pass • Render Select • Render • RenderStream In • RenderStream Out • Reorder • Resolution • RGB Key • RGB to HSV • Scalable Display • Screen Grab • Screen • Script • Select • Shared Mem In • Shared Mem Out • SICK • Slope • Spectrum • SSAO • Stype • Substance Select • Substance • Subtract • SVG • Switch • Syphon Spout In • Syphon Spout Out • Text • Texture 3D • Texture Sampling Parameters • Threshold • Tile • Time Machine • TOP • Experimental:TOP • TOP Viewer • Touch In • Touch Out • Transform • Under • Video Device In • Video Device Out • Video Stream In • Video Stream Out • Vioso • Web Render • Experimental:ZED Select • ZED