Experimental:Phaser CHOP

From TouchDesigner Documentation
Jump to: navigation, search


The Phaser CHOP does staggered (time-offset) animation interpolation. Phaser outputs one channel with multi-samples. Each sample animates from 0 to 1 over a cycle, but each sample value rises from 0 and arrives at 1 at different times.

For example, you may have a set of N objects that you want to animate from a start position to an end position. You set Num Samples to N, which will make the Phaser CHOP output one channel with N samples that will animate the samples from 0 to 1 and be interpolated with an easing function. In the Phaser CHOP the start-to-end cycle is controlled by the first input of the CHOP, which is expected to be one channel with value between 0 to 1.

The 0-1 values can be used with the Lookup CHOP to animate groups of channels.

By default the timing is staggered uniformly. If you want to stagger their transitions irregularly, you use the second input, a set of values in one CHOP channel (typically N samples) that are between 0 and 1. The phase value specifies the object's timing relationship with the rest of those in the CHOP. A phase value of 1 corresponds to an animated object thats "ahead of the pack" (ie. it will start animating before the others). A value of 0 corresponds to an object that is late (ie. it will be the last to start easing/animating). If a phase input is not provided then the phase will simply be i/N where N is the total number of objects (ie. samples), and i is the index of the current sample.

There is also a notion of an "Edge" in the Phaser, which describes the cohesiveness of the group of animated objects and how fast the samples rise. A small value will cause the objects to go through the animation very quickly or at high value, very slowly and in unison with other samples.

The Phaser CHOP is a collaborative effort between Derivative and David Braun. The functionality of Phaser CHOP draws heavily from David's research and development in quantitative easing, of which he did a TouchDesigner Summit Talk.

See also the OP Snippets.


Parameters - Phaser Page

Edge edge - The separation edge of the phasing between two states. A smaller edge corresponds to sharper separation according to differences in phase. Edge Parameter will not be used if there is an Edge Input.

Num Samples nsamples - Specify the size of the output. This parameter will not be used if there is a phase input.

Output Format outputformat - - Specifies the format of the output.

  • Multi-Samples samples - Multiple samples in a channel.
  • Multi-Channel channels - Multiple channels.

Parameters - Common Page

Time Slice timeslice - Turning this on forces the channels to be "Time Sliced". A Time Slice is the time between the last cook frame and the current cook frame.

Scope scope - To determine which channels get affected, some CHOPs use a Scope string on the Common page.

Sample Rate Match srselect - - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or "Linear" if the Interpolate Options are not available.

  • Resample At First Input's Rate first - Use rate of first input to resample others.
  • Resample At Maximum Rate max - Resample to the highest sample rate.
  • Resample At Minimum Rate min - Resample to the lowest sample rate.
  • Error If Rates Differ err - Doesn't accept conflicting sample rates.

Export Method exportmethod - - This will determine how to connect the CHOP channel to the parameter. Refer to the Export article for more information.

  • DAT Table by Index datindex - Uses the docked DAT table and references the channel via the index of the channel in the CHOP.
  • DAT Table by Name datname - Uses the docked DAT table and references the channel via the name of the channel in the CHOP.
  • Channel Name is Path:Parameter autoname - The channel is the full destination of where to export to, such has geo1/transform1:tx.

Export Root autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is Path:Parameter are relative to.

Export Table exporttable - The DAT used to hold the export information when using the DAT Table Export Methods (See above).

Operator Inputs

  • Input 0 - The timing of the phase. When not wired the timing will default to an LFO ramp over 4 seconds.
  • Input 1 - When wired the Phaser CHOP's output will mirror the phase input's. However, if Mult-Channel Output Format is selected it will in effect transpose the output.
  • Input 2 - Edge samples will be used instead of the Edge parameter.

Ableton Link • Analyze • Angle • Attribute • Audio Band EQ • Audio Device In • Audio Device Out • Audio Dynamics • Audio File In • Audio File Out • Audio Filter • Audio Movie • Audio NDI • Audio Oscillator • Audio Para EQ • Audio Play • Audio Render • Audio Spectrum • Audio Stream In • Experimental:Audio Stream In • Audio Stream Out • Beat • Bind • BlackTrax • Blend • Blob Track • Bullet Solver • Clip Blender • Clip • Clock • Composite • Constant • Copy • Count • CPlusPlus • Cross • Cycle • DAT to • Delay • Delete • DMX In • Experimental:DMX In • DMX Out • Envelope • EtherDream • Event • Expression • Extend • Fan • Feedback • File In • File Out • Filter • Experimental:Filter • Experimental:FreeD • Function • Gesture • Handle • Helios DAC • Hog • Hokuyo • Hold • Import Select • In • Info • Interpolate • Introduction To CHOPs id • Inverse Curve • Inverse Kin • Join • Joystick • Keyboard In • Keyframe • Kinect Azure • Experimental:Kinect Azure • Kinect • Lag • Laser • Leap Motion • Leuze ROD4 • LFO • Limit • Logic • Lookup • LTC In • LTC Out • Math • Experimental:Math • Merge • MIDI In • MIDI In Map • MIDI Out • Mouse In • Mouse Out • NatNet In • Noise • Null • Object • Oculus Audio • Oculus Rift • OpenVR • Experimental:OpenVR • OSC In • OSC Out • Out • Override • Panel • Pangolin • Parameter • Pattern • Perform • Experimental:Phaser • Pipe In • Pipe Out • PosiStageNet • Pulse • RealSense • Experimental:RealSense • Record • Rename • Render Pick • Reorder • Replace • Resample • S Curve • Scan • Script • Select • Sequencer • Serial • Shared Mem In • Shared Mem Out • Shift • Shuffle • Slope • SOP to • Sort • Speed • Splice • Spring • Stretch • Stype • Switch • Sync In • Sync Out • Tablet • Time Slice • Timeline • Timer • TOP to • Experimental:TOP to • Touch In • Touch Out • Trail • Transform • Transform XYZ • Trigger • Trim • Warp • Wave • Experimental:WrnchAI • ZED

An Operator Family which operate on Channels (a series of numbers) which are used for animation, audio, mathematics, simulation, logic, UI construction, and many other applications.

A CHOP outputs one or more channels, where a channel is simply a sequence of numbers, representing motion, audio, etc. Channels are passed between CHOPs in TouchDesigner networks. See also Export.

A Time Slice is the time from the last cook frame to the current cook frame. In CHOPs it is the set of short channels that only contain the CHOP channels' samples between the last and the current cook frame.

A parameter in most CHOPs that restricts which channels of that CHOP will be affected. Normally all channels of a CHOP are affected by the operator.

samples-per-second of a CHOP. Each CHOP in your network has a sample rate, whether it is used or not. The overall timeline has a "frame rate", which is the number of animation frames per second, generally your monitor display frequency.

Exporting is the connection of CHOP channels to parameters of operators. The output of each exporting CHOP is one or more channels, active only while the CHOP Viewer is on. The current value of a channel can be exported to a parameter of any operator, overriding that parameter's value. See Parameter.

An Operator Family that manipulates text strings: multi-line text or tables. Multi-line text is often a command Script, but can be any multi-line text. Tables are rows and columns of cells, each containing a text string.

The location of an operator within the TouchDesigner environment, for example, /geo1/torus1, a node called torus1 in a component called geo1. The path / is called Root. To refer instead to a filesystem folder, directory, disk file or http: address, see Folder.

Parameters in TouchDesigner are an operator's settings (numbers, menus, flags, strings, paths) which the user can alter. Parameters for any operator can be opened by right-clicking on the operator and selecting "Parameters..." A currently selected operator's parameters can be viewed in a Network Editor by pressing the keyboard shortcut 'p'.

TouchDesigner is a hierarchy of components. "root" is the top-most network in the hierarchy. The Path is simply /. A typical path is /project1/moviein1.