Experimental:Audio VST CHOP
The Audio VST CHOP loads VST3 Plugin files that generate (instruments) or process (filter) audio. See the VST overview.
The plugin's parameters can be exposed and driven bi-directionally via a corresponding TouchDesigner parameter or the plugin's GUI control. In order to get the full benefit of the bidirectional nature of the plugin parameters it is recommended to use Binding or a Bind CHOP when driving the parameter in TouchDesigner, rather than an expression or CHOP reference.
Depending on the plugin, the Audio VST CHOP takes up to 4 multi-channel inputs.
See the discussion on which VST plugins work well with TouchDesigner - VST Plugin Testing. Also for a selection of free VSTs along with a useful set of affordable upgraded versions go here: https://hy-plugins.com.
2 Free HY-Plugins are included with TouchDesigner and can be found using the Help > Browse Samples menu. This will open a file browser to the TouchDesigner application Samples folder which contains a VST3 folder holding one synthesizer and filter plugin for both Windows and MacOS. The Windows VST3 plugin files can be distinguished by their included "64 Bit" string.
Installed VST plugins are found in
C:Program Files/Common Files/VST on Windows, and be
/Library/Audio/Plug-Ins/VST3 on macOS.
Tip: You can get detailed info about the VST plugin by attaching an Info DAT to the CHOP.
VST is a trademark of Steinberg Media Technologies GmbH, registered in Europe and other countries.
Parameters - VST Page
file - The path to the VST3 plugin. Default install location for VST3 plugins is
C:/Program Files/Common Files/VST3 on Windows and
/Library/Audio/Plug-Ins/VST3 on macOS.
reloadpulse - Reloads the VST3 plugin.
Load Plugin State on Start
loadpluginstate - The plugin state (including preset value and other UI elements) is saved into the toe file and is restored on TouchDesigner start, if enabled. The toggle exists to provide a work-around to plugins that do not behave well (eg. crash) when their plugin state is set; the toggle should be disabled in those cases.
rate - Sets the sample rate of the VST3 plugin.
Plugin GUI Always on Top
alwaysontop - When enabled, the plugin window will always be on top of other windows.
Display Plugin GUI
displaygui - When pulsed, will open the plugin GUI in a separate window. Changing a parameter in the plugin GUI while the learn toggle is enabled will create the parameter on the Audio VST CHOP side.
learnparms - When enabled, parameters that are interacted with in the VST Plugin window will be created as parameters on the Plugin page, ie. they will be learned.
regularparms - When enabled, every Plugin parameter will be created on the Plugin page.
readonlyparms - When enabled, all read-only Plugin parameters will be created on the Plugin page. If Regular Parameters is also toggled on then this toggle will have no effect.
Clear Learned Parameters
clearlearnedparms - When pulsed, all learned parameters will be cleared. If neither Regular or Read-only parameters are toggled on then the parameters will be destroyed.
callbacks - Reference to the DAT containing Audio VST CHOP supported callbacks.
Parameters - Bus Layout Page
Custom Bus Layout
custombuslayout - Enables custom bus layout. If disabled the bus layout will be the plugin's default.
Output Bus Layout
outputbuslayout - Select the output bus layout (ie. number of channels) of the output bus. This will directly affect how many channels the Audio VST CHOP has.
Main Input Bus Layout
maininputlayout - Select the main input bus layout (ie. number of channels). The main input bus is always the CHOP's first input, and this selection determines how many channels it accepts from it.
Enable Aux Input 0
enableauxinput0 - Enable the auxiliary bus.
Aux Input Bus Layout 0
auxinputlayout0 - Select the auxiliary bus layout (ie. number of channels) for the auxiliary input. An auxiliary input is every input after the main input. Not every plugin will support auxiliary buses, and the parameter will be disabled if not supported. If no more sequential auxiliary buses can be added (ie. the +/- disappears in the parameter sequence) then that means the auxiliary bus maximum has been reached.
Parameters - Playhead Page
customplayhead - Enable the custom playhead. When disabled, the plugin will always sequentially step forward in time. Not all plugins support a custom playhead.
timecodeop - Specifies the playhead time of the plugin. A reference to either a CHOP with channels 'hour', 'second', 'minute', 'frame', a DAT with a timecode string in its first cell, or a Timecode Class object.
tempo - The tempo of the playhead. Not all plugins support changing of the tempo via the playhead.
signature - ⊞ - The time signature of the playhead. Not all plugins support changing of the time signature via the playhead.
Parameters - Common Page
timeslice - Turning this on forces the channels to be "Time Sliced". A Time Slice is the time between the last cook frame and the current cook frame.
scope - To determine which channels get affected, some CHOPs use a Scope string on the Common page. See Pattern Matching.
Sample Rate Match
srselect - ⊞ - Handle cases where multiple input CHOPs' sample rates are different. When Resampling occurs, the curves are interpolated according to the Interpolation Method Option, or "Linear" if the Interpolate Options are not available.
- Resample At First Input's Rate
first- Use rate of first input to resample others.
- Resample At Maximum Rate
max- Resample to the highest sample rate.
- Resample At Minimum Rate
min- Resample to the lowest sample rate.
- Error If Rates Differ
err- Doesn't accept conflicting sample rates.
exportmethod - ⊞ - This will determine how to connect the CHOP channel to the parameter. Refer to the Export article for more information.
- DAT Table by Index
datindex- Uses the docked DAT table and references the channel via the index of the channel in the CHOP.
- DAT Table by Name
datname- Uses the docked DAT table and references the channel via the name of the channel in the CHOP.
- Channel Name is Path:Parameter
autoname- The channel is the full destination of where to export to, such has
autoexportroot - This path points to the root node where all of the paths that exporting by Channel Name is Path:Parameter are relative to.
exporttable - The DAT used to hold the export information when using the DAT Table Export Methods (See above).
Info CHOP Channels
Extra Information for the Audio VST CHOP can be accessed via an Info CHOP.
Common CHOP Info Channels
- start - Start of the CHOP interval in samples.
- length - Number of samples in the CHOP.
- sample_rate - The samplerate of the channels in frames per second.
- num_channels - Number of channels in the CHOP.
- time_slice - 1 if CHOP is Time Slice enabled, 0 otherwise.
- export_sernum - A count of how often the export connections have been updated.
Common Operator Info Channels
- total_cooks - Number of times the operator has cooked since the process started.
- cook_time - Duration of the last cook in milliseconds.
- cook_frame - Frame number when this operator was last cooked relative to the component timeline.
- cook_abs_frame - Frame number when this operator was last cooked relative to the absolute time.
- cook_start_time - Time in milliseconds at which the operator started cooking in the frame it was cooked.
- cook_end_time - Time in milliseconds at which the operator finished cooking in the frame it was cooked.
- cooked_this_frame - 1 if operator was cooked this frame.
- warnings - Number of warnings in this operator if any.
- errors - Number of errors in this operator if any.
|• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •|