Camera Blend COMP

From Derivative
Jump to navigation Jump to search

Summary
[edit]

The Camera Blend Component blends the 3D object transforms and viewing settings of multiple Camera Components together. It gives you some extra flexibility in setting up parent-child relationships. It operates like the Switch SOP and Sequence Blend SOPs insofar as it takes more than one input and blends or switches those into one output.

The Camera Blend COMP can animate camera parameters and positions between various cameras.

To set up, wire the bottom connector of a Camera COMP to the top input of the Camera Blend COMP. Then for another Camera COMP, wire its bottom connector to the top of the Camera Blend COMP. Then you can adjust the Weight parameters of the Camera Blend COMP.

The View and Background parameter pages are used as the camera parameters when non-Camera COMPs are connected to the Camera Blend COMP.

See also Blend COMP.

PythonIcon.pngcamerablendCOMP_Class


Parameters - Blend Page

Type parenttype - - Method in which parent transforms (i.e. Translate, Rotate, Scale) are combined to produce a unique blended transform.

  • Blend blend - When the type is set to Blend, up to the first 4 inputs will be blended using the Weight[1-4] and Mask[1-4] parameters.
  • Sequence sequence - When the type is set to Sequence this value controls which input parent contributes to the child's position. It can be used to animate a child from one parent to another. A sequence value outside the range of inputs is interpreted as unparenting the child.
  • Constrain constrain - This object is constrained to the specified input parent. As the parent changes, the relative transform is maintained. This transform is reset when the reset frame is reached. Changing the constraint parent maintains the position without jumping.

Sequence sequence - Select which input to use for the position when set to Sequence or Constrain.

Reset Frame reset - When in constrain mode, this will reset the final transform back to its original position. On other frames, when the constrained parent changes, the relative transform to this camera is maintained.

Weight 1 blendw1 - These weights are used to weight each corresponding input parent.

Mask 1 blendm1 - These masks are used to select which component of each parent is used in the blending process.

Weight 2 blendw2 - These weights are used to weight each corresponding input parent.

Mask 2 blendm2 - These masks are used to select which component of each parent is used in the blending process.

Weight 3 blendw3 - These weights are used to weight each corresponding input parent.

Mask 3 blendm3 - These masks are used to select which component of each parent is used in the blending process.

Weight 4 blendw4 - These weights are used to weight each corresponding input parent.

Mask 4 blendm4 - These masks are used to select which component of each parent is used in the blending process.

Normal Offset noffset - When exactly three parents are input, the child position may be offset in the direction perpendicular to the triangular plane they form.

Orient Axes axesorient - When exactly three parents are input, this option will orient the child's local axes to match the orientation of the parents as follows:

  • First Parent: Axes Center
  • Second Parent: Axes +X
  • Third Parent: Axes +Y

Short Rotation shortrot - Does quaternion blending in cases where 2 inputs are being blended.


Parameters - Xform Page

The Xform parameter page controls the object component's transform in world space.

Transform Order xord - - This allows you to specify the order in which the changes to your Component will take place. Changing the Transform Order will change where things go much the same way as going a block and turning east gets you to a different place than turning east and then going a block. In matrix math terms, if we use the 'multiply vector on the right' (column vector) convention, a transform order of Scale, Rotate, Translate would be written as T * R * S * Position.

  • Scale Rotate Translate srt -
  • Scale Translate Rotate str -
  • Rotate Scale Translate rst -
  • Rotate Translate Scale rts -
  • Translate Scale Rotate tsr -
  • Translate Rotate Scale trs -

Rotate Order rord - - This allows you to set the transform order for the Component's rotations. As with transform order (above), changing the order in which the Component's rotations take place will alter the Component's final position. A Rotation order of Rx Ry Rz would create the final rotation matrix as follows R = Rz * Ry * Rx

  • Rx Ry Rz xyz - R = Rz * Ry * Rx
  • Rx Rz Ry xzy - R = Ry * Rz * Rx
  • Ry Rx Rz yxz - R = Rz * Rx * Ry
  • Ry Rz Rx yzx - R = Rx * Rz * Ry
  • Rz Rx Ry zxy - R = Ry * Rx * Rz
  • Rz Ry Rx zyx - R = Rx * Ry * Rz

Translate t - - This allows you to specify the amount of movement along any of the three axes; the amount, in degrees, of rotation around any of the three axes; and a non-uniform scaling along the three axes. As an alternative to entering the values directly into these fields, you can modify the values by manipulating the Component in the Viewport with the Select & Transform state.

  • X tx -
  • Y ty -
  • Z tz -

Rotate r - - Theis specifies the amount of movement along any of the three axes; the amount, in degrees, of rotation around any of the three axes; and a non-uniform scaling along the three axes. As an alternative to entering the values directly into these fields, you can modify the values by manipulating the Component in the Viewport with the Select & Transform state.

  • X rx -
  • Y ry -
  • Z rz -

Scale s - - This specifies the amount of movement along any of the three axes; the amount, in degrees, of rotation around any of the three axes; and a non-uniform scaling along the three axes. As an alternative to entering the values directly into these fields, you can modify the values by manipulating the Component in the Viewport with the Select & Transform state.

  • X sx -
  • Y sy -
  • Z sz -

Pivot p - - The Pivot point edit fields allow you to define the point about which a Component scales and rotates. Altering the pivot point of a Component produces different results depending on the transformation performed on the Component.

For example, during a scaling operation, if the pivot point of an Component is located at -1, -1, 0 and you wanted to scale the Component by 0.5 (reduce its size by 50%), the Component would scale toward the pivot point and appear to slide down and to the left.

Objects17.gif

In the example above, rotations performed on an Component with different pivot points produce very different results.

  • X px -
  • Y py -
  • Z pz -

Uniform Scale scale - This field allows you to change the size of an Component uniformly along the three axes.

Note: Scaling a camera's channels is not generally recommended. However, should you decide to do so, the rendered output will match the Viewport as closely as possible when scales are involved.

Parent Transform Source parentxformsource - - Select what position is used as the transform source for this obejct. Can be one of "Parent (Hierarchy)", "Specify Parent Object", or "World Origin".

  • From Parent Object (Hierarchy) hierarchy -
  • Specify Parent Object specify -
  • World Origin worldorigin -

Parent Object parentobject - Allows the location of the object to be constrained to any other object whose path is specified in this parameter.

Look At lookat - Allows you to orient this Component by naming another 3D Component you would like it to Look At, or point to. Once you have designated this Component to look at, it will continue to face that Component, even if you move it. This is useful if, for instance, you want a camera to follow another Component's movements. The Look At parameter points the Component in question at the other Component's origin.

Tip: To designate a center of interest for the camera that doesn't appear in your scene, create a Null Component and disable its display flag. Then Parent the Camera to the newly created Null Component, and tell the camera to look at this Component using the Look At parameter. You can direct the attention of the camera by moving the Null Component with the Select state. If you want to see both the camera and the Null Component, enable the Null Component's display flag, and use the Select state in an additional Viewport by clicking one of the icons in the top-right corner of the TouchDesigner window.

Forward Direction forwarddir - - Sets which axis and direction is considered the forward direction.

  • +X posx -
  • -X negx -
  • +Y posy -
  • -Y negy -
  • +Z posz -
  • -Z negz -

Look At Up Vector lookup - - When specifying a Look At, it is possible to specify an up vector for the lookat. Without using an up vector, it is possible to get poor animation when the lookat Component, for example, passes through the Y axis of the target Component.

  • Don't Use Up Vector - Use this option if the look at Component does not pass through the Y axis of the target Component.
  • Use Up Vector - This precisely defines the rotates on the Component doing the looking. The Up Vector specified should not be parallel to the look at direction. See Up Vector below.
  • Use Quaternions - Quaternions are a mathematical representation of a 3D rotation. This method finds the most efficient means of moving from one point to another on a sphere.
  • Don't use up vector off -
  • Use up vector on -
  • Use quaternions quat -
  • Use Roll roll -

Path SOP pathsop - Names the SOP that functions as the path you want this Component to move along. For instance, you can name a SOP that provides a path for the camera to follow.

Roll roll - Using the angle control you can specify a Component's rotation as it animates along the path.

Position pos - This parameter lets you specify the Position of the Component along the path. The values you can enter for this parameter range from 0 to 1, where 0 equals the starting point and 1 equals the end point of the path. The value slider allows for values as high as 10 for multiple "passes" along the path.

Orient along Path pathorient - If this option is selected, the Component will be oriented along the path. The positive Z axis of the Component will be pointing down the path.

Orient Up Vector up - - When orienting a Component, the Up Vector is used to determine where the positive Y axis points.

  • X upx -
  • Y upy -
  • Z upz -

Auto-Bank Factor bank - The Auto-Bank Factor rolls the Component based on the curvature of the path at its current position. To turn off auto-banking, set the bank scale to 0.


Parameters - Pre-Xform Page

The Pre-Xform parameter page applies a transform to the object component the same way connecting another Object as a parent of this node does. The transform is applied to the left of the Xform page's parameters. In terms of matrix math, if we use the 'multiply on the right' (column vector) convention, the equation would be preXForm * xform * Position.

Apply Pre-Transform pxform - Enables the transformation on this page.

Transform Order pxord - - Refer to the documentation on Xform page for more information.

  • Scale Rotate Translate srt -
  • Scale Translate Rotate str -
  • Rotate Scale Translate rst -
  • Rotate Translate Scale rts -
  • Translate Scale Rotate tsr -
  • Translate Rotate Scale trs -

Rotate Order prord - - Refer to the documentation on Xform page for more information.

  • Rx Ry Rz xyz -
  • Rx Rz Ry xzy -
  • Ry Rx Rz yxz -
  • Ry Rz Rx yzx -
  • Rz Rx Ry zxy -
  • Rz Ry Rx zyx -

Translate pt - - Refer to the documentation on Xform page for more information.

  • X ptx -
  • Y pty -
  • Z ptz -

Rotate pr - - Refer to the documentation on Xform page for more information.

  • X prx -
  • Y pry -
  • Z prz -

Scale ps - - Refer to the documentation on Xform page for more information.

  • X psx -
  • Y psy -
  • Z psz -

Pivot pp - - Refer to the documentation on Xform page for more information.

  • X ppx -
  • Y ppy -
  • Z ppz -

Uniform Scale pscale - Refer to the documentation on Xform page for more information.

Reset Transform preset - This button will reset this page's transform so it has no translate/rotate/scale.

Commit to Main Transform pcommit - This button will copy the transform from this page to the main Xform page, and reset this page's transform.

Xform Matrix/CHOP/DAT xformmatrixop - This parameter can be used to transform using a 4x4 matrix directly. For information on ways to specify a matrix directly, refer to the Matrix Parameters page. This transform will be applied after the regular Pre-Transform transformation. That is, it'll be applied in the oder XformMatrix * PreXForm * Position.


Parameters - View Page

Projection projection - - A pop-up menu lets you choose from Perspective and Orthographic projection types. A third option Perpective to Ortho Blend enables the Projection Blend parameter below which can be used to blend between perspectives.

  • Perspective perspective -
  • Orthographic ortho -
  • Perspective to Ortho Blend persporthoblend -
  • Custom Projection Matrix custommatrix -

Projection Blend projectionblend -

Ortho Width orthowidth -

Viewing Angle Method viewanglemethod - -

  • Horizontal FOV horzfov -
  • Vertical FOV vertfov -
  • Focal Length and Aperture focalaperture -

FOV Angle fov -

Focal Length focal -

Aperture aperture -

Near near - This control allows you to designate the near clipping planes. Geometry closer from the lens than these distances will not be visible.

NOTE: If geometry in your scene is producing z-depth artifacts, increase the resolution of the camera's z-depth buffer. To do this, decrease the difference between near and far clipping planes, starting with the near plane.

Far far - This control allows you to designate the far clipping planes. Geometry further away from the lens than these distances will not be visible.

NOTE: If geometry in your scene is producing z-depth artifacts, increase the resolution of the camera's z-depth buffer. To do this, decrease the difference between near and far clipping planes, starting with the near plane.

Window X/Y win - - These parameters define the center of the window during the rendering process. The window parameter takes the view and expands it to fit the camera's field of vision. It is important to note that this action is independent of perspective. In other words, it acts as though you are panning the camera without actually moving the camera.

  • X winx -
  • Y winy -

Window Size winsize - The Window Size parameter specifies the dimensions for expanding the view. Similar to Window X / Y, this parameter creates a zoom effect by scaling the screen before rendering to the viewport.

Window Roll winroll - This parameter sets the amount, in degrees, the window area rolls. This can be set as a static value or as an aspect that changes over the course of the animation. The roll occurs about the centre of the window.

IPD Shift ipdshift -

Proj Matrix/CHOP/DAT projmatrixop -

Background Color bgcolor - - Sets the background color and alpha of the camera's view.

  • Red bgcolorr -
  • Green bgcolorg -
  • Blue bgcolorb -
  • Alpha bgcolora -


Parameters - Settings Page

Fog fog - - This menu determines the type of fog rendered in the viewport:

Linear fog uses the following equation:

Objects14.gif

Exponential fog uses the following equation:

Objects18.gif

Squared Exponential fog uses the following equation:

Objects20.gif

Regardless of the fog mode, f is clamped to the range [0,1] after it is computed. Then, if GL is in RGBA color mode, the fragment's color Cr is replaced by:

Objects19.gif

  • Off off -
  • Linear linear -
  • Exponential exp -
  • Squared Exponential exp2 -

Fog Density fogdensity - A value that specifies density or thickness, used in both exponential fog types. Only non-negative densities are accepted.

Fog Near fognear - The starting distance of the fog. If geometry is closer to the camera than this distance, fog will not be calculated in the color of the geometry. Used in the linear fog equation.

Fog Far fogfar - The far distance used in the linear fog equation.

Fog Color fogcolor - - The color of the fog.

  • Red fogcolorr -
  • Green fogcolorg -
  • Blue fogcolorb -

Fog Alpha fogalpha - Used to control the background opacity of the scene.

Fog Map fogmap -

Camera Light Mask camlightmask -

Material material -


Parameters - Render Page

The Display parameter page controls the component's material and rendering settings.

Material material - Selects a MAT to apply to the geometry inside.

Render render - Whether the Component's geometry is visible in the Render TOP. This parameter works in conjunction (logical AND) with the Component's Render Flag.

Draw Priority drawpriority - Determines the order in which the Components are drawn. Smaller values get drawn after larger values. The value is compared with other Components in the same parent Component, or if the Component is the top level one listed in the Render TOP's 'Geometry' parameter, then against other top-level Components listed there. This value is most often used to help with Transparency.

Pick Priority pickpriority - When using a Render Pick CHOP or a Render Pick DAT, there is an option to have a 'Search Area'. If multiple objects are found within the search area, the pick priority can be used to select one object over another. A higher value will get picked over a lower value. This does not affect draw order, or objects that are drawn over each other on the same pixel. Only one will be visible for a pick per pixel.

Wireframe Color wcolor - - Use the R, G, and B fields to set the Component's color when displayed in wireframe shading mode.

  • Red wcolorr -
  • Green wcolorg -
  • Blue wcolorb -

Light Mask lightmask - By default all lights used in the Render TOP will affect geometry renderer. This parameter can be used to specify a sub-set of lights to be used for this particular geometry. The lights must be listed in the Render TOP as well as this parameter to be used.


Parameters - Extensions Page

The Extensions parameter page sets the component's python extensions. Please see extensions for more information.

Object ext0object - A number of class instances that can be attached to the component.

Name ext0name - Optional name to search by, instead of the instance class name.

Promote ext0promote - Controls whether or not the extensions are visible directly at the component level, or must be accessed through the .ext member. Example: n.Somefunction vs n.ext.Somefunction

Re-Init Extensions reinitextensions - Recompile all extension objects. Normally extension objects are compiled only when they are referenced and their definitions have changed.


Parameters - Common Page

The Common parameter page sets the component's node viewer and clone relationships.

Parent Shortcut parentshortcut - Specifies a name you can use anywhere inside the component as the path to that component. See Parent Shortcut.

Global OP Shortcut opshortcut - Specifies a name you can use anywhere at all as the path to that component. See Global OP Shortcut.

Shortcut iop0shortcut - Specifies a name you can use anywhere inside the component as a path to "Internal OP" below. See Internal Operators.

OP iop0op - The path to the Internal OP inside this component. See Internal Operators.

Node View nodeview - - Determines what is displayed in the node viewer, also known as the Node Viewer. Some options will not be available depending on the Component type (Object Component, Panel Component, Misc.)

  • Default Viewer default - Displays the default viewer for the component type, a 3D Viewer for Object COMPS and a Control Panel Viewer for Panel COMPs.
  • Operator Viewer opviewer - Displays the node viewer from any operator specified in the Operator Viewer parameter below.

Operator Viewer opviewer - Select which operator's node viewer to use when the Node View parameter above is set to Operator Viewer.

Enable Cloning enablecloning - Control if the OP should be actively cloneing. Turning this off causes this node to stop cloning it's 'Clone Master'.

Enable Cloning Pulse enablecloningpulse - Instantaneously clone the contents.

Clone Master clone - Path to a component used as the Master Clone.

Load on Demand loadondemand - Loads the component into memory only when required. Good to use for components that are not always used in the project.

Enable External .tox enableexternaltox - When on (default), the external .tox file will be loaded when the .toe starts and the contents of the COMP will match that of the external .tox. This can be turned off to avoid loading from the referenced external .tox on startup if desired (the contents of the COMP are instead loaded from the .toe file). Useful if you wish to have a COMP reference an external .tox but not always load from it unless you specifically push the Re-Init Network parameter button.

Enable External .tox Pulse enableexternaltoxpulse - This button will re-load from the external .tox file (if present).

External .tox Path externaltox - Path to a .tox file on disk which will source the component's contents upon start of a .toe. This allows for components to contain networks that can be updated independently. If the .tox file can not be found, whatever the .toe file was saved with will be loaded.

Reload Custom Parameters reloadcustom - When this checkbox is enabled, the values of the component's Custom Parameters are reloaded when the .tox is reloaded. This only affects top-level parameters on the component, all parameters on nodes inside the component are always reloaded with the .tox.

Reload Built-In Parameters reloadbuiltin - When this checkbox is enabled, the values of the component's built-in parameters are reloaded when the .tox is reloaded. This only affects top-level parameters on the component, all parameters on nodes inside the component are always reloaded with the .tox.

Save Backup of External savebackup - When this checkbox is enabled, a backup copy of the component specified by the External .tox parameter is saved in the .toe file. This backup copy will be used if the External .tox can not be found. This may happen if the .tox was renamed, deleted, or the .toe file is running on another computer that is missing component media.

Sub-Component to Load subcompname - When loading from an External .tox file, this option allows you to reach into the .tox and pull out a COMP and make that the top-level COMP, ignoring everything else in the file (except for the contents of that COMP). For example if a .tox file named project1.tox contains project1/geo1, putting geo1 as the Sub-Component to Load, will result in geo1 being loaded in place of the current COMP. If this parameter is blank, it just loads the .tox file normally using the top level COMP in the file.

Relative File Path Behavior relpath - - Set whether the child file paths within this COMP are relative to the .toe itself or the .tox, or inherit from parent.

  • Use Parent's Behavior inherit - Inherit setting from parent.
  • Relative to Project File (.toe) project - The path, when specified as a relative path, will be relative to the .toe file.
  • Relative to External COMP File (.tox) externaltox - The path, when specified as a relative path, will be relative to the .tox file. When no external COMP file is specified, or when Enable External .tox is not toggled on, this doesn't have any impact.


Info CHOP Channels

Extra Information for the Camera Blend COMP can be accessed via an Info CHOP.

Common COMP Info Channels

  • num_children - Number of children in this component.

Common Operator Info Channels

  • total_cooks - Number of times the operator has cooked since the process started.
  • cook_time - Duration of the last cook in milliseconds.
  • cook_frame - Frame number when this operator was last cooked relative to the component timeline.
  • cook_abs_frame - Frame number when this operator was last cooked relative to the absolute time.
  • cook_start_time - Time in milliseconds at which the operator started cooking in the frame it was cooked.
  • cook_end_time - Time in milliseconds at which the operator finished cooking in the frame it was cooked.
  • cooked_this_frame - 1 if operator was cooked this frame.
  • warnings - Number of warnings in this operator if any.
  • errors - Number of errors in this operator if any.


TouchDesigner Build:

COMPs
Actor • Ambient Light • Animation • Annotate • Base • Blend • Bone • Bullet Solver • Button • Camera Blend • Camera • MediaWiki:Common.js • Component • Constraint • Container • Engine • Environment Light • FBX • Field • Force • Geo Text • Geometry • GLSL • Handle • Impulse Force • Light • List • Null • Nvidia Flex Solver • Nvidia Flow Emitter • OP Viewer • Palette:depthProjection • Parameter • Replicator • Select • Shared Mem In • Shared Mem Out • Slider • Table • Text • Time • USD • Widget • Window